Meja Tengah Laboratorium

Meja tengah laboratorium (Island Bench Laboratory) merupakan salah satu jenis meja laboratorium yang posisinya ditempatkan di tengah dalam suatu ruangan laboratorium. meja laboratorium jenis ini dibutuhkan pada ruangan laboratorium yang cukup besar. Jika anda membutuhkan meja tengah laboratorium silahkan hubungi kami dan kami juga menerima ukuran custom sesuai dengan yang anda butuhkan.

Meja Tengah Laboratorium

Material Body  Kayu, Besi, Stainless
Material Top Table Keramik, Granit dan Phenolic Resin
Ukuran (p x l x t) cm 300 x 150 x 85 (Custom)
Fitur Optional Rak susun, rak cabinet, stop kontak, sink, Keran

 

Meja Dinding Laboratorium

Meja dinding laboratorium (Wall Beach Laboratory) merupakan salah satu jenis meja laboratorium yang posisinya ditempatkan di dinding ruangan laboratorium. Meja laboratorium jenis ini ditempatkan pada ruangan laboratorium yang tidak besar. 

Meja Dinding Laboratorium

Material Body  Kayu, Besi, Stainless
Material Top Table Keramik, Granit dan Phenolic Resin
Ukuran (p x l x t) cm 300 x 75 x 85, 400 x 75 x 85 (Custom)
Fitur Optional Rak susun, rak cabinet, stop kontak, sink, Keran

 

Meja Corner Laboratorium

Corner bench laboratory (Meja corner laboratorium) merupakan salah satu jenis meja laboratorium yang di tempatkan di sudut dinding yang dengan berbentuk siku pada suatu ruangan laboratorium. Umumnya meja corner laboratorium di butuhkan pada ruangan laboratorium yang tidak cukup besar.

Meja Corner Laboratorium

Spesifikasi :

Material Body Kayu, Besi, Stainless
Material Top TableKeramik, Granit dan Phenolic Resin
Ukuran (p x l x t) cm200x140x85 (Custom)
Fitur OptionalRak susun, rak cabinet, stop kontak, sink

 

Alat Ukur Elektrostatis EX-715

Deskripsi :

Certified for use in hazardous areas, the EX-715 Static Meter has been developed to investigate industrial static electricity problems.

The EX-715 measures static electricity levels from 10 V up to 200,000 V on the surface of a material or body at 100 mm distance.  With a ‘hold’ facility to freeze the reading on the display, the Meter has two automatically selected ranges:

·         0 – 20 kV in 10 V increments

·         20 – 200 kV in 100 V increments

The EX-715 shows where and how the static electricity is generated, its magnitude and its polarity.  This gives the engineer a scientific basis for analysis of the static problem, monitoring the efficiency of remedial actions and setting levels for acceptable standards.

For more information on ATEX and IECEx certification.

Alat Ukur Elektrostatis EX-715

 Spesifikasi :

Construction
Anodised aluminium case with recessed stainless steel sensing plate for maximum integrity and accuracy.
Dimensions
124 x 64 x 24 mm (H x W x D).
Weight
175 g.
Range / Resolution / Accuracy
0-200 kV / 100 V and 0-20 kV / 10 V. Automatic range selection. Accuracy at calibration is better than +/- 5 %. 
Drift
<0.1 % in 10 seconds.
Calibration
On a 150 mm x 150 mm charge plate. Can be calibrated on other charge plate sizes to meet country standards, e.g. 450 mm x 450 mm for China.
Operation
Click button to zero and make readings. Click button again to ‘hold’ the reading. Click again to resume readings. Automatic switch-off after 60 seconds. Low volt indicator shows condition of battery.
Equipment
Static meters are supplied with carrying case, 9 V PPS battery, earth lead and certificate of calibration.
Environmental
70 % rH non-condensing max.
Certification
CE. EN-500081-1 (EMC) and BS7506-2 (Construction).


Alat Ukur Electrostatic Field Meter 715

Deskripsi :

The 715 Static Meter enables industrial engineers to investigate static problems, monitor the effectiveness of solutions and set standards for acceptable levels – whether in the process or on the product.

The 715 measures static electricity levels up to 200,000 V on the surface of a material or body at a distance of 100 mm.  It can show where and how the static is generated, its magnitude and its polarity.

The Meter has two ranges which are selected automatically:

·    0 – 20 kV with a resolution of 10 V  

·     20 – 200 kV with a resolution of 100 V

Accurate at calibration to +/- 5 %, the stability and ease of use of the 715 Static Meter make it the leading instrument in its class.

Alat Ukur Electrostatic Field Meter 715

Spesifikasi :

Construction
Anodised aluminium case with recessed stainless steel sensing plate for maximum integrity and accuracy.
Dimensions
124 x 64 x 24 mm (H x W x D).
Weight
175 g.
Range / Resolution / Accuracy
0-200 kV / 100 V and 0-20 kV / 10 V. Automatic range selection. Accuracy at calibration is better than +/- 5 %. 
Drift
<0.1 % in 10 seconds.
Calibration
On a 150 mm x 150 mm charge plate. Can be calibrated on other charge plate sizes to meet country standards, e.g. 450 mm x 450 mm for China.
Operation
Click button to zero and make readings. Click button again to ‘hold’ the reading. Click again to resume readings. Automatic switch-off after 60 seconds. Low volt indicator shows condition of battery.
Equipment
Static meters are supplied with carrying case, 9 V PPS battery, earth lead and certificate of calibration.
Environmental
70 % rH non-condensing max.
Certification
CE. EN-500081-1 (EMC) and BS7506-2 (Construction).