Deskripsi :
Certified for use in hazardous areas, the EX-715 Static Meter has been developed to investigate industrial static electricity problems.
The EX-715 measures static electricity levels from 10 V up to 200,000 V on the surface of a material or body at 100 mm distance. With a ‘hold’ facility to freeze the reading on the display, the Meter has two automatically selected ranges:
· 0 – 20 kV in 10 V increments
· 20 – 200 kV in 100 V increments
The EX-715 shows where and how the static electricity is generated, its magnitude and its polarity. This gives the engineer a scientific basis for analysis of the static problem, monitoring the efficiency of remedial actions and setting levels for acceptable standards.
For more information on ATEX and IECEx certification.
Spesifikasi :
|
Construction
|
Anodised aluminium case with recessed stainless steel
sensing plate for maximum integrity and accuracy.
|
|
Dimensions
|
124 x 64 x 24 mm (H x W x D).
|
|
Weight
|
175 g.
|
|
Range / Resolution / Accuracy
|
0-200 kV / 100 V and 0-20 kV / 10 V. Automatic range
selection. Accuracy at calibration is better than +/- 5 %.
|
|
Drift
|
<0.1 % in 10 seconds.
|
|
Calibration
|
On a 150 mm x 150 mm charge plate. Can be calibrated
on other charge plate sizes to meet country standards, e.g. 450 mm x 450 mm
for China.
|
|
Operation
|
Click button to zero and make readings. Click button
again to ‘hold’ the reading. Click again to resume readings. Automatic
switch-off after 60 seconds. Low volt indicator shows condition of battery.
|
|
Equipment
|
Static meters are supplied with carrying case, 9 V
PPS battery, earth lead and certificate of calibration.
|
|
Environmental
|
70 % rH non-condensing max.
|
|
Certification
|
CE. EN-500081-1 (EMC) and BS7506-2 (Construction).
|
EmoticonEmoticon